Building a tree house

Building a tree house
Getty Images

Advice and tips for building, attaching and furnishing your home in the treetops.

Need a tree guy? Learn the secrets your arborist won’t tell you.

Advertisement

Where should you build a treehouse?

Where should you build a treehouse?
Getty Images

When thinking about treehouse ideas, take stock of the trees in your yard. Choose a healthy, long-lived hardwood for maximum support, with load-bearing branches at least 20cm in diameter (larger if the species is a softwood). It doesn’t need to be too high, just high enough so nobody bumps their head when walking underneath it.

Discover 15 trees you should never grow in your yard.

Keep weight and stability in mind

Keep weight and stability in mind
Getty Images

While it’s easy to get carried away with cool treehouse ideas, building a house in a tree brings with it certain physical limitations. Here are some structural things to keep in mind while designing your DIY treehouse:

Build the platform as close to the trunk as possible, and add diagonal bracing for extra strength to support uneven loads.

Put the load over the base of the tree, not on one side.

For heavy tree houses, consider spreading the weight among several trees.

A tree house will act like a sail in strong winds, adding a large load to the tree’s roots. In high-wind areas, build your tree house in the lower third of the tree.

When building on one main trunk, level the main platform by cantilevering the beams and supporting them from below.

Learn about DIY with kids.

Don’t restrict tree growth

Don’t restrict tree growth
FAMILY HANDYMAN

Leave gaps around the tree.

To accommodate tree movement and growth, allow gaps around any branches or trunks that penetrate the tree house.

Don’t constrict branches with rope, straps or wire. This can strangle the tree.

Add spacers between the beams and the tree to allow movement.

Use extra-long large bolts. This leaves most of the shaft exposed so you can mount items on the ends and lets the tree grow over the shaft.

Allow a 5cm gap around the tree if it passes through the floor and n 8cm gap if it passes through the roof (see photo).

Check out these 15 breathtaking DIY fairy gardens.

How to level a treehouse floor

How to level a treehouse floor
FAMILY HANDYMAN

To keep a large tree house stable, centre the load over the trunk and spread the weight among several branches.

It’s much easier to build the rest of the structure if the floor is level and can support the entire weight of the tree house. Consider these methods when generating DIY treehouse ideas:

Lay beams across the branches and shim until level.

Run the beams between trunks of different trees.

Cantilever the beams out from a single trunk and support them from above or below.

Learn how to build a backyard bedroom by yourself

Build sections on the ground first

Build sections on the ground first
FAMILY HANDYMAN

It’s easier and safer to fabricate the main sections on the ground and then hoist them into position. If branches penetrate areas of the tree house, complete the construction up in the trees.

“I assembled the platform and house on the ground, then disassembled them,” said expert Bob Lackey. “After attaching the supports to the trees, I lifted the platform piece by piece and assembled it on the supports. An extra set of hands was needed only to raise the four walls and two roof sections. Final assembly took place in the trees.”

Use the right fasteners

Use the right fasteners
FAMILY HANDYMAN

Allow for flexible supports, especially if you use more than one tree, so that trees can move in the wind. Special floating brackets allow the tree to sway.

Don’t run bolts through the tree. Lag bolts cause less tree damage than through bolts.

Don’t use too many fasteners. One large bolt is better than many screws or nails. You get the same strength but with fewer puncture wounds to the tree.

Whenever possible, perch your tree house on top of fasteners rather than pinning beams to the tree. This gives the tree room to move and grow.

Even for smaller, lighter tree houses where the load is spread over three or four attachment points, consider using 2.5cm or 3cm diameter lag bolts.

You can order floating brackets and tree house fasteners from specialty suppliers such as garnierlimbs.com or treehousesupplies.com or special-order them from home centres. These bolts are pricey (about $100 each) and often require special tools. But they allow the tree more room to grow (they can support heavy loads up to 12cm from the tree) and they hold more weight than normal bolts.

Learn how to build a pergola.

Cool treehouse accessories you can buy (or make yourself)

Cool treehouse accessories you can buy (or make yourself)
PHOTO COURTESY OF BARBARABUTLER.COM

Don’t forget the accessories with your treehouse ideas! Just a couple of finishing touches turn a “box up in a tree” into the ultimate fort and hang-out zone.

Here are some accessories that go great with a treehouse:

Ball/potato launcher

Water cannon

Fire pole or slide

Trap door

Solar-powered lights or lanterns

Fold-down benches and tables.

Be conscious of tree house safety issues

Be conscious of tree house safety issues
FAMILY HANDYMAN

Building a treehouse is a wonderfully whimsical and romantic idea. But it’s important to go into it with your eyes open. Keep the following issues in mind:

Tree damage

Tree houses do damage trees. Foot traffic compresses the soil, which is bad for the roots. Adding weight in the branches can also stress the tree roots, and fasteners can cause infection. Most trees will survive this abuse, but think twice before you build in a treasured tree.

How to minimise tree damage

Consider using one or two supports ground to take stress off the tree.

Make the fewest punctures necessary to support the tree house safely. Any damage to the bark of the tree is a potential entry point for disease and bacteria.

Don’t put fasteners too close together, which can weaken that section of the tree. Use at least 2cm bolts spaced at least 45cm apart vertically and 30cm apart horizontally.

Avoid slinging cables and ropes over branches. They cut through the bark as the structure moves.

Neighbourhood concerns and council regulations

Do you need a building permit? It depends on local laws and the nature of your tree house. If you’re considering building one that will be visible to your neighbours, discuss it with them in advance to avoid problems. Often a council becomes involved after a neighbour complains. Stay away from boundary lines and don’t build your tree house where it will infringe on a neighbour’s privacy.

Injuries

Kids can get hurt playing in a treehouse. Don’t build higher than 2.5m and make sure to build safe, strong rails. Also, nobody should be in a tree house in high winds or lightning.

Check out these incredible treehouses to get started.

Sign up here to have Handyman’s favourite stories straight to your inbox.

Source: Family Handyman